Pathway Connectivity is now shipping Revision 2 of its DIN-rail mountable LED Dimmer, the eDIN #1008. With LED wiring still being novel to many installers, the 1008 has been redesigned for greater robustness and protection from accidental damage. Each of the six outputs is now fuse-protected against mis-wiring, with two spare fuses shipped on every card. An onboard DMX-present relay is user-wired as either open or closed, while a contact closure “panic” input drives all outputs to full regardless of the DMX status. User control has also been expanded. Each output on the 1008 can be driven by a 0-10VDC input. This analog control is automatically HTP-merged with the DMX level, when present. Along with single precision, double precision and non-dim modes, a single-channel mode has been added, allowing one DMX channel to drive all six outputs. Other additions include a user-settable grandmaster that limits the maximum output and a minimum level setting. The user-set minimum remains in effect even without DMX being present, making the 1008 suited for aisle lighting or other never-off applications. Firmware is now field-upgradable, using a Pathport and a free upgrader application. With 4A current handling at 12-24VDC, the eDIN 1008 LED Dimmer provides reliable, stepless DMX control of just about any common-anode LED fixture.