Last, but not least, for No Doubt’s reunion tour is LD Butch Allen’s lighting design. Working with creative director Ray Woodbury, Allen created a design that complemented the 48’x 22’ WinVision 8mm LED wall with Barco/High End Systems Showbeams 2.5, Vari-Lite VL3500 Wash units, and VL3000 Profiles. Lighting the set from within, under the drum kit and cone were Philips/Color Kinetics ColorBlast 12s, while Elation Impressions were also used from underneath the stage, as well as on the upstage truss. In addition, parts of the set were under-lit with densely packed Acclaim X-tubes, while the over-stage trusses was loaded with Martin Stagebars (both pixel-mapped to appear as low-res video elements). DL.3s also painted the stage with video or extended content out into the audience.

Check out Allen’s paperwork below.

No Doubt Truss Plot
No Doubt Air Plot
No Doubt Air Circuiting Plot
No Doubt Rigging Plot

Lighting Equipment
2 MA Lighting grandMA Console
21 Elation Impression
20 Vari-Lite VL3500 Wash
7 Vari-Lite VL3000 Profile
6 Barco/High End Systems DL.3
6 Barco/High End Systems Showbeams 2.5
Philips/Color Kinetics 12 ColorBlasts
7 Robe REDBlinder 2-96
140 Martin Professional Stagebar 54
19 4-Lite
2 ETC Source Four Ellipsoidal 19˚
17 Martin Professional Atomic Strobe
6 Martin Professional Jem ZR33 Hi-Mass™ Smoke Machine
200' GT Truss
29 1-Ton Hoist
Acclaim X-tubes