The RTS TBX-Tribus surpasses the Dual Bus Expansion card with superior channel capability and redefined system architecture, thus improving the robustness of the TBX-Tribus-based ADAM system. One card connects up to three ADAM frames, allowing synchronous communication over multiple ADAM frames using a Mesh network structure. Multiple TBX-Tribus cards can be used in an ADAM frame to take complete advantage of the redundancy feature offered for mission-critical communication environments. The TBX-Tribus supports all standard, hot-swappable, and configurable features within the ADAM intercom family and works in both AIO-8 and AIO-16 frame environments with simple software settings via RTS AZedit intercom software. Each card communicates with a backcard in the frame, providing three full-duplex links to transmit digital audio as well as control data over a fiber network.
The
TBX-Tribus card is fully backward compatible with all existing
AES,
AIO, and
RVON cards in an
ADAM intercom system. The hardware and software is completely compatible to work seamlessly with the
TDM and control bus circuitry for routing audio and control data. This card provides a downloadable firmware feature through RTS
AZedit intercom software.
Channels per link
The
TBX-Tribus has three fiber links. Each link can support up to a maximum of 256 audio channels per link. This channel capability is provided for
AIO-16 systems. Moreover, the link can also be scaled down to 128 channels, allowing it to support
AIO-8-based intercom systems.
New System Architecture
The system framework has been redefined for the
TBX-Tribus, allowing the system to reconfigure itself in the advent of a frame failure. In the scenario where the master frame fails, another
ADAM frame within the system seizes control until the fault is fixed. This fail-safe mechanism monitors both audio and control, messaging to prevent any corrupt behavior in the system.
Support for Multiple Distances
The backcard features three small-form-factor pluggable (
SFP) connectors that allow support for multiple distances. This allows the user to configure cards based on their custom application. The user can insert Commercial-Off-the-Shelf (
COTS) modules (Multi-Mode/Single Mode) to match their needs.
System Expansion
The
TBX-Tribus employs the next generation
ASIC "Nucleus" for higher performance and future system expansion.