Peter McBoyle, a theatrical sound designer and consultant headquartered in Stratford, Ontario, Canada, was brought in to design the show and specify its sound reinforcement system. A well-known figure among the theater and themed entertainment communities, McBoyle faced numerous challenges in assembling a viable sound reinforcement system for the musical. He ultimately specified a 12-channel Lectrosonics wireless system consisting of the company's SMQV dual battery Super-Miniature Digital Hybrid Wireless® transmitters, SMa Super-Miniature transmitters, and Venue receiver mainframes. He discussed the challenges the project presented.
“This show uses a live big band and a featured vocalist that are all performing along to original vocal tracks of Frank Sinatra,” McBoyle explained, “so sound quality is critical and expectations are high. Because both wired and wireless mics are used on this show, I wanted the wireless mics to have indistinguishable sound quality from the wired mics, which led me to Lectrosonics. None of the sonic artifacts typical of other wireless systems that use compandors is present in the Lectrosonics equipment.”
“As an example,” he continued, “we had to move someone from a wired DPA 4099 microphone to a wireless DPA 4099 for an alto sax solo in the song â€˜Take Five.' We didn't have to touch a thing—no EQ changes at all. We just switched to the Lectrosonics wireless system and continued about our business.”
The compact form factor of the Lectrosonics SM Series transmitters was an equally significant consideration. “We didn't want some large, unsightly wireless transmitter on the dancers,” McBoyle added. “Twyla was very concerned of not wanting to encumber the dancers in any way; so the light weight and small size of the Lectrosonics transmitter was another huge consideration.”
The Lectrosonics wireless system used on the show consists of eight SMQV transmitters with DPA 4099 microphones for various musical instruments, with two of these being backup systems. There are also two channels (one primary, one backup) of SMa Super-Miniature transmitters for one of the dancers. Further, a Lectrosonics RM remote control is available to assist with the various transmitters' operation. “The RM is invaluable in a theatrical setting,” says McBoyle. “It enables one to access the transmitter without disrupting the performer. The RF tech thinks it's great.”
In addition to the ten aforementioned channels, two final channels (primary and backup) accommodate a Sennheiser SKM 5200 handheld transmitter with a Neumann KK 105s capsule. “The fact that the Lectrosonics equipment has an emulation mode that enables it to work with a variety of other manufacturers' gear adds to its versatility,” McBoyle said. “With its emulation mode, the Lectrosonics system can accommodate just about every imaginable configuration one is likely to require.”
Two Lectrosonics Venue receivers—each stocked with six channels of VRT receiver modules—support the various transmitters. With its ability to house six channels in a 1RU rackspace, the Venue Series receivers played an equally important role in McBoyle's decision to specify Lectrosonics. “In most Broadway theaters,” he added, “space backstage is at a premium, so the ability to have 12 channels in just two rackspaces is a huge benefit.”
Before turning his attention to other business, McBoyle offered this closing thought, “With a musical of this nature, sound quality is more important than ever. Right from the start, the Lectrosonics gear has performed unbelievably well. People have responded very positively to the sound of the show, and Lectrosonics is a major part of its success.”
For additional information about Come Fly Away, visit the show's website at www.comeflyaway.com.
Well respected within the film, broadcast, and theater technical communities since 1971, Lectrosonics wireless microphone systems and audio processing products are used daily in mission-critical applications by audio engineers familiar with the company's dedication to quality, customer service, and innovation. Lectrosonics is a US manufacturer based in Rio Rancho, New Mexico. Visit the company online at www.lectrosonics.com.