Meyer Sound has announced MINA, the newest and smallest member of the MILO® family of self-powered line array loudspeakers that include MILO, MICA, and M’elodie. MINA carries the same musicality and intelligibility that define other members of the MILO family loudspeakers, but suitable for smaller venues such as theatres, ballrooms, and houses of worship. Less than 18.5” wide, the speaker can produce up to 128dB SPL at 1m with an operating frequency range from 75Hz to 18kHz over a wide 100° horizontal coverage area. The low-distortion speakers exhibits the cabinet-to-cabinet consistency essential for a line array to accurately project energy where it is needed. MINA can be installed as main arrays and can integrate seamlessly with M’elodie® and MICA® line arrays as fill subsystems.
In a Meyer Sound-patented trapezoidal enclosure, a 3” high-frequency compression driver is coupled to a low-distortion, constant directivity horn through a new acoustical combining manifold derived from the proprietary REM® ribbon emulation manifold. Two 6.5” neodymium magnet cone drivers produce the low and mid frequencies. MINA deploys Meyer Sound’s new three-channel Class-D power amplifier and has 950W of output (1900W peak). The optional RMS remote monitoring software reports all operating parameters of each amplifier to the system operator’s computer. Other available options include weather protection and custom colors. A small footprint, light weight, and high output are all key features that distinguish MINA in the sound reinforcement marketplace.